Computers Keyboard

Professional

Computers Keyboard 0 Comments

Keyboard boot steps

Keyboard boot This is the BIOS settings on the motherboard, and has nothing to do with any system.
Once the keyboard is powered up, you can turn on your computer by entering the correct password.
Specific steps are as follows:
First start the machine normally, press the Del key to enter the system CMOS settings different motherboards are not the same, if Del can not get in, you can always press F12, F11, F2 to try, use the keyboard’s arrow keys to move the cursor to POWER After the MANAGEMENT SETUP item, press Enter.
In the menu that opens, find the KB Power ON Function option, which defaults to Power Key, and press the PageDown key to change it to KB Password.
At this time, there is an option KB Power ON Password: Press Enter. Press Enter here, enter the password, for example, mxy, press Enter, the system will let you enter again to confirm the correctness of the password.
After the above work is completed, press the ESC key to return to the main menu, select SAVE & EXIT SETUP to save and exit the CMOS settings. In the future, you can enter the system by typing m x y directly on the keyboard.
If you do not have some of the above options on your motherboard, please follow the instructions below: In the motherboard BIOS there is this option Integrated Peripherals – “There is Power On Function -” select the Password option, then in the following option KB Power On Passwoed or Hot key Power On to see the motherboard BIOS options Enter the key you want to set the boot for example: PP or SS or other buttons, then save the settings. After the computer is powered on, just press the hotkey you set on the keyboard or you want to set it as a password. The computer will automatically boot up!
Note: If you want to boot the keyboard, you should also pay attention to the power supply of the keyboard to the keyboard. For the keyboard to be turned on, a low voltage is required as the power for starting the keyboard when the keyboard is turned on. Under normal circumstances, the current should not be less than 1A. Insufficient power supply on the PS/2 interface of the motherboard caused the keyboard to fail to boot and caused a keyboard interface error.

Related

Encrypting the security of your mobile hard drive
Computers Keyboard
Encrypting the security of your mobile hard drive

The encrypted mobile hard disk uses a 32-bit high-speed encryption chip to install a secure door for the mobile hard […]

Future trends in mobile storage devices
Computers Keyboard
Future trends in mobile storage devices

With the rapid application of the Internet, the popularity of various digital consumer electronic products and the concept of mobile […]

Keyboard key conflict
Computers Keyboard
Keyboard key conflict

Keyboard key conflict When you press several keys on the keyboard at the same time, these keys can’t be reflected […]

Leave a Reply

Your email address will not be published. Required fields are marked *